Comparable Loctite products for hinge bearing replacement
Posted: Wed May 04, 2011 11:39 am
just FYI.
When replacing the press fit hinge bearing on the blade, the maint. manual recommends that "hand tight" bearings be secured with LocTite.
Loctite discontinued the Brantly recommended loctite products Type AA,15-1 adhesive and Locquic cleaner about a year ago.
Replaced with products #089 for the adhesive and for the replacement compatible cleaner product #7649, Part #21347
089 is in a 50 mil container, available in larger qtys
7649 is in a 25 gram aerosol spray, available in larger qtys.
available through any LocTite distributor.
I'm getting mine through McMaster Carr. It's a special order product for them.
Randy
When replacing the press fit hinge bearing on the blade, the maint. manual recommends that "hand tight" bearings be secured with LocTite.
Loctite discontinued the Brantly recommended loctite products Type AA,15-1 adhesive and Locquic cleaner about a year ago.
Replaced with products #089 for the adhesive and for the replacement compatible cleaner product #7649, Part #21347
089 is in a 50 mil container, available in larger qtys
7649 is in a 25 gram aerosol spray, available in larger qtys.
available through any LocTite distributor.
I'm getting mine through McMaster Carr. It's a special order product for them.
Randy