Need Equipment list

[Hillberg]

Have a Brantly sn 18 built in 1958 , I need the equipment list ,for an extensive rebuild-She was under water....

[fixnfly]

Welcome to the world of Brantlys and Brantly web site. It sounds like there is a good story behind this bird, being underwater and such, care to share it with us. I'm sure one of us will be able to help with what you need , it sounds like you have a big project ahead of you good luck .

[Ron Spiker]

If this is N6795D, here is a link to a youtube video of the helicopter, including several comments about a flood that it was in.
http://www.youtube.com/watch?v=6Sr_CuTa ... re=related


And here are several pictures of the helicopter during its life.

N6795D-1s.jpg (38.02 KiB) Viewed 3921 times

N6795D-2s.jpg (33 KiB) Viewed 3920 times

N6795D-3.jpg (10.17 KiB) Viewed 3918 times

N6795D-4.jpg (36.22 KiB) Viewed 3922 times

[Hillberg]

Yep thats it. Rick Kosar had it in corona air port- Floyd Hiser flew it and Scott Donnaly Both became very secussful helicopter opperators,It was sold to a guy in Washington State and he abandonded it after a flood in 1997 after it sat, I poured oil in the gear boxes and engine to over flowing and drained out water & mud, Its a sad site , In 1959 It was a Kentucky state trooper helicopter and went back to brantly for a hard landing From 1982 I saw Rick flying it,and Scott flew it for his commercial cert to and from corona and the colarado river., and found a missing couple in the mountains after they were missing for over a year. now all in pieces its time to fix it up, We tried to contact the owner and his responce was I don't want it anymore,,,,But He still has the logs...

[9121u]

HI i have a old equipment list also some parts and a flight manual for b2 if interested call me or email me.if this will help.thanks 9121u ...tom

[Randy Strock]

Hi Tom -
I have a complete parts manual for 2297U. (now 400CX).
If you forward your address to me, I'll be glad to send a complete copy to you.
Best of luck with your project.

Randy Strock
email - randystrock@infratech-mfg.com
410 658 8500 work

[Hillberg]

Thanks-Don Hillberg 2223 Johnson Dr Ventura Ca 93003

[scrapper]

re 2nd photo.....is the use bubble covers like that recommended? a member here mentioned,
wind moving it around can leave a undesired "finish". Any comments?

Suppose one went on a camp trip, night or two, can you buy a cover for the center rotor
to keep rain off? Or like in Ron's trip to the outter banks, he had to land to let a storm pass.

scrap

Good luck on the salvage job!!

[Ron Spiker]

When I'm going on an overnight trip, or for whatever reason need to let the ship sit out over night or in bad weather, I do cover it with a bubble cover, mast cover, tail rotor cover, main rotor blade covers, and blade tiedowns. If I know it's going to rain, I also cover the cooling fans. As for wind moving them around, you should be able to secure the covers tight enough to prevent this.

[scrapper]

Ron, Did you buy those? or have them custom made.

Material?

Thx
scrap

[Ron Spiker]

Bruce's custom covers.

http://www.aircraftcovers.com